Dialogic Diva ISDN PCI Instalační příručka stáhnout pdf (Strana 36)

ENGLISH

Installation

page 36

Note: Looking at the RJ10 and RJ11 connector with the exposed connector

pins facing you, the pins are numbered from 1 to 4 and 1 to 6 from left to

right as shown below.

Dialogic

Diva

Analog-8 Media Boards:

Diva Analog-8 Media Boards have four RJ45 ports for connecting four dongles.

The dongles have two ports each for connecting two separate analog lines;

therefore, you can connect to up to eight analog lines. You can use any port;

typically, you must specify the port number during software configuration. The

port numbers are shown below. The diagram is oriented with the edge

connector pointing downwards.

Connect your Dialogic

Diva

Analog-8 Media Board as follows:

RJ10 connector RJ11 connector

Port 1 and Port 2

Port 3 and Port 4

Port 5 and Port 6

Port 7 and Port 8

1. Take the four cables with the dongle and plug the

RJ45 connectors into the Diva Media Board.

Diva Analog

Media Board

2. Take the eight cables and

plug the RJ10 connectors into the

dongle. The jack labeled with "A"

corresponds to the ports 1,3,5, and 7.

The jack labeled with "B" corresponds

to the ports 2,4,6, and 8.

3. Plug the RJ11 connectors

into the wall jack or PBX.

Wall jack or PBX

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 167 168

Žádné komentáře

Dialogic Diva ISDN PCI Instalační příručka Strana 36