Dialogic Diva ISDN PCI Instalační příručka stáhnout pdf (Strana 25)

ENGLISH

Dialogic® Diva® Media Board Installation Guide

page 25

(B) Connect your Dialogic

Diva

Media Board

How you connect your Diva Media Board depends on the type of Diva Media

Board you have:

• To connect a Dialogic

Diva

BRI Media Board, follow the instructions

below.

• To connect a Dialogic

Diva

PRI Media Board, follow the instructions on

page 28.

• To connect a Dialogic

Diva

Analog Media Board, follow the instructions

on page 33.

Connect your Dialogic

Diva

BRI Media Board

Note: If you plan to use your Diva BRI Media Board as network termination

for back-to-back operation or connection to PBX networks, go to page 27.

In Europe and most countries worldwide:

In Europe as well as most countries except North America and Japan, connect

your ISDN line with a standard ISDN cable.

In North America, Japan, and some other countries:

In North America, Japan, and a few other countries, you need an NT1 to

connect your ISDN line. Make sure that a power supply is available for the

NT1 of this line. Usually, a PBX is installed in the same area as the NT1 and

the service provider can use the power supply of the PBX for the ISDN line as

well. If this is not the case, you have to order a combo device from your service

provider. This device consists of an installation rack into which an NT1 module

and a power supply module is mounted.

1. Take the cable included with the

Diva Media Board and plug one end

into the board.

ISDN wall jack with NT

2. Plug the other end into the ISDN

wall jack.

Diva BRI

Media Board

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 ... 167 168

Komentáře k této Příručce

Žádné komentáře

Dialogic Diva ISDN PCI Instalační příručka Strana 25

Komentáře k této Příručce

Související produkty a manuály pro Sítě Dialogic Diva ISDN PCI