Dialogic Diva ISDN PCI Instalační příručka stáhnout pdf (Strana 31)

ENGLISH

Dialogic® Diva® Media Board Installation Guide

page 31

Note: Diva V-8PRI PCIe FS Media Boards do not supply the function of the

CSU or DSU internally. You need to purchase it from an independent distributor.

Connect the Diva V-8PRI PCIe FS Media Board as shown in this

graphic:

Contact assignments (plugs and jacks):

Note: Looking at the RJ45 connectors with the exposed connector pins facing

you, the pins are numbered from 1 to 8 from left to right as shown below.

1. Take the four cables with the dongle and plug the

RJ45 connectors into the Diva Media Board.

Diva V-8PRI

PCIe FS

Media Board

2. Take the eight cables and plug

the RJ45 connectors into the

dongle. The jack labeled with "A"

corresponds to the ports 1,2,3,

and 4. The jack labeled with "B"

corresponds to the ports 5,6,7,

and 8.

3. Plug the RJ45 connectors

into the wall jack or PBX.

Wall jack or PBX

RJ45 Signals Dongle with RJ45

jacks

Signals

Pin 1 Receive + (RX +) (Port A)

Port A

Pin 1 Receive + (RX +)

Pin 2 Receive - (RX -) (Port A) Pin 2 Receive - (RX -)

Pin 3 Receive + (RX +) (Port B) Pin 4 Transmit + (TX +)

Pin 4 Transmit + (TX +) (Port A) Pin 5 Transmit - (TX -)

Pin 5 Transmit - (TX -) (Port A)

Port B

Pin 1 Receive + (RX +)

Pin 6 Receive - (RX -) (Port B) Pin 2 Receive - (RX -)

Pin 7 Transmit + (TX +) (Port B) Pin 4 Transmit + (TX +)

Pin 8 Transmit - (TX -) (Port B) Pin 5 Transmit - (TX -)

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 167 168

Žádné komentáře

Dialogic Diva ISDN PCI Instalační příručka Strana 31