
Dialogic® Diva® SIPcontrol™ Configuration
37
Use this
controller for
MWI:
The controller to use for MWI needs to be connected to a PBX port,
which allows for updating of the message waiting indication.
A PBX typically requests an authentication to allow it to update the
message waiting indication. This authentication is done by a
Controlling user number. The administrator of the PBX can
provide this number.
Controlling user
provided
number:
The Controlling user provided number (CUPN) is the ISDN
number provided by the controlling user, that is, the ISDN number
of the originating user of the indicated message. Few PBXs require
the CUPN. The administrator of the PBX can provide more
information.
Network Interfaces
The Network Interfaces configuration allows for configuring the global network
parameters of Diva SIPcontrol, such as the IP addresses and the ports on which Diva
SIPcontrol will be listening. Diva SIPcontrol supports only a single IP address.
To open the online help for a specific parameter, click the parameter, and a window with the
help text will appear.
You can configure the following parameters when you define or modify a network interface:
Displays the name of the installed Ethernet adapter. The preset
designation can be replaced with a unique identifier, such as "Internal
Network".
Displays the complete description of the installed Ethernet adapter
assigned by the operating system.
Displays the IP address of the computer on which Diva SIPcontrol is
installed.
If you use UDP as the IP protocol for calls from SIP, enable the check
box to display the standard port number 5060. This standard port can
be used if no other SIP application is running on the same computer
as Diva SIPcontrol. Note that you can only enable one network
interface.
Komentáře k této Příručce