Dialogic 4000 SERIES Uživatelský manuál stáhnout pdf (Strana 57)

Dialogic® Diva® SIPcontrol™ Configuration

Page 57

Cause Code Maps

Depending on the type of SIP peer selected, different default mapping tables are used to adapt SIPcontrol's

responses to the values expected by that peer.

If the internal default mapping table provided by Diva SIPcontrol does not fulfill your needs, e.g., because your

local PBX uses non-standard cause codes, you can configure your own cause code mapping table, which will be

checked before the default table is checked. See Cause Code Mapping on page 81 for the cause/response code

mapping table. If you create your own cause code mapping table, make sure to select it in the SIP Peers section

under Enhanced

To add a cause code, open the Cause Code Maps section and click the Add button. To change the settings,

click the Details button on the right hand side. To open the online help for a specific parameter, click the

parameter, and a window with the help text will appear. You can configure the following parameters when you

create or modify a cause code:

Name Enter a name to easily identify the cause code mapping table.

Direction Select the direction for which this table is used:

• Select PSTN to SIP to configure mappings of PSTN cause codes to SIP response codes. This mapping

is used if a call from a SIP endpoint to a PSTN endpoint cannot be completed.

• Select SIP to PSTN to configure mappings of SIP response codes to PSTN cause codes. This mapping

is used if a call from a PSTN endpoint to a SIP endpoint cannot be completed.

PSTN cause

code

Enter the PSTN cause code equivalent to the SIP response code entered in this menu. The PSTN cause

code is also known as Q.850 cause code. Valid values are 1 to 127.

Note: For SIP to SIP calls or PSTN to PSTN calls, the original cause code is preserved, so mapping is

unnecessary.

SIP response

code

Enter the SIP response code equivalent to the PSTN cause code entered in this menu. The values are

only valid in the range from 400 to 699.

Note: For SIP to SIP calls or PSTN to PSTN calls, the original cause code is preserved, so mapping is

unnecessary.

Default Enter the cause or response code that Diva SIPcontrol should use per default if no mapping for the

received cause or response code is specified in this table.

Note: If this value is not configured and no mapping for the received cause or response code is specified

in this table, Diva SIPcontrol's internal default mapping table will be used.

1 2 ... 52 53 54 55 56 57 58 59 60 61 62 ... 167 168

Žádné komentáře

Dialogic 4000 SERIES Uživatelský manuál Strana 57