Dialogic Brooktrout TR1034 BRI Uživatelský manuál stáhnout pdf (Strana 9)

RightFax 8.5 Fax Board Guide 9

Installing Brooktrout TR112 Fax Boards

The Brooktrout TR112 series of fax boards are two channel analog boards supported by RightFax

but no longer manufactured by Brooktrout. These boards require you to set an I/O address and

hardware interrupt before installing. For details on these settings, see the following section,

“Installing Brooktrout TR114 Series Analog Fax Boards.”

Please refer to your Brooktrout documentation for instructions on setting the I/O and hardware

interrupts on your TR112 fax board.

Installing Brooktrout TR114 Series Analog Fax Boards

The Brooktrout TR114 series of analog fax boards consists of models with up to four channels of

some combination of loop-start and/or DID channels. Instructions in this section apply to all

supported Brooktrout TR114 analog fax boards unless otherwise noted. (If you are installing

Brooktrout TR114 series digital fax boards, see ”Supported Brooktrout TR114 Series Digital Fax

Boards” on page 18.)

The following table lists all of the Brooktrout TR114 series of analog fax boards supported by

RightFax.

In Brooktrout’s naming scheme, “TR114” is the board model, “I” or “P” indicates ISA or PCI,

followed by the number of channels, and then a letter indicating the type of phone line interface

(loop-start, DID, or combination).

Brooktrout TR114 boards that support DID interfaces require an external –48V DC power supply.

Brooktrout recommends the Tellabs 8012 regulated power supply, which provides 250 mA of

current (see ”Connecting a Tellabs 8012 power supply to a DID fax board” on page 33). This must be

purchased separately from your fax board. Phone cables of the appropriate type for your phone

lines (RJ-45 or RJ-11) are also required.

Table 1B Supported Brooktrout TR114 Series Analog Fax Boards

Board model Functionality

TR114-I1L One loop-start channel ISA analog fax board.

TR114-I2C

One loop-start and one DID channel ISA analog fax board. Requires Tellabs 8012 power

supply.

TR114-I2D Two DID channel ISA analog fax board. Requires Tellabs 8012 power supply.

TR114-I2L Two loop-start channel ISA analog fax board.

TR114-I4C

Two loop-start and two DID channel ISA analog fax board. Requires Tellabs 8012 power

supply.

TR114-I4D Four DID channel ISA analog fax board. Requires Tellabs 8012 power supply.

TR114-I4L Four loop-start channel ISA analog fax board.

TR114-P1L One loop-start channel PCI analog fax board.

TR114-P2C

One loop-start and one DID channel PCI analog fax board. Requires Tellabs 8012 power

supply.

TR114-P2D Two DID channel PCI analog fax board. Requires Tellabs 8012 power supply.

TR114-P2L Two loop-start channel PCI analog fax board.

TR114-P4C

Two loop-start and two DID channel PCI analog fax board. Requires Tellabs 8012 power

supply.

TR114-P4D Four DID channel PCI analog fax board. Requires Tellabs 8012 power supply.

TR114-P4L Four loop-start channel PCI analog fax board.

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 35 36

Komentáře k této Příručce

Žádné komentáře

Dialogic Brooktrout TR1034 BRI Uživatelský manuál Strana 9

Komentáře k této Příručce

Související produkty a manuály pro Sítě Dialogic Brooktrout TR1034 BRI