Dialogic DMG1000 Uživatelský manuál stáhnout pdf (Strana 4)

Dialogic

1000 Media Gateway Series

Quick Start Guide for Avaya Modular Messaging Release 5.2

Step 2 - Gateway Installation

1. Unpack gateway.

2. Connect PBX station cables to the rear panel.

3. Connect power supply and power cord.

Step 3 - Gateway Configuration

There are two options for performing the initial configuration of the gateway -- serial or IP.

Connecting with Serial Port

1. Connect a DB9 serial cable to the DIAGNOSTICS port on the gateway.

2. Establish a connection to the gateway (Baud=38400, Data Bits=8, Stop Bits=1, Parity=none, Flow

Control=none) using a terminal emulation program (e.g. HyperTerminal).

See Table 2 for the serial port pin outs.

Table 1. DIAGNOSTICS Connector Pin Designations

Pin Description

1 Not used

2 Transmit

3 Receive

4 Not used

5 Ground

6 Not used

7 Not used

8 Not used

9 Not used

Connecting with Ethernet

1. Connect gateway to Network using LAN connector on the back of the gateway.

2. Configure computer connecting to gateway on the 10.12.13.x subnet (e.g. 10.12.13.75) and subnet mask of

255.255.255.0.

3. Use Telnet and connect to gateway at: 10.12.13.74.

1 2 3 4 5 6 7 8 9 10 11 12

Žádné komentáře

Dialogic DMG1000 Uživatelský manuál Strana 4