Dialogic 4000 Series SU4.1 Uživatelský manuál stáhnout pdf (Strana 10)

Dialogic

4000 Media Gateway as a Survivable Branch Appliance for Microsoft Lync Server 2010

Deployment Guide

10. In the Sip Transport Protocol field, click on the transport type the SBA uses.

Note: For security reasons, it is recommended that if you deploy an SBA, you

consider using TLS.

11. Publish the Topology by right-clicking on the top-level name of the topology in tree

view and selecting Topology > Publish.

12. Using the Microsoft Lync Server 2010 Control Panel, create at least two test users

associated with the SBA. The users must have valid SIP addresses and line URIs, and

must be set for Enterprise Voice.

13. Verify that the SBA and the Microsoft Lync Server 2010 topology have valid

routes/address maps to allow Microsoft Lync Server 2010 to make PSTN calls.

14. Using the following PowerShell commands on Microsoft Lync Server 2010, set up the

built-in users for OcsHealthMonitoring:

New-CsHealthMonitoringConfiguration –Identity

<XdsGlobalRelativeIdentity> -FirstTestUserSipUri <String> -

SecondTestUserSipUri <String>

Where:

 Identity is the FDQN of the pool from which the health monitoring

configuration settings are assigned.

 FirstTestUserSipUri is the SIP address of the first test user to be configured

for use by this test. The SIP address must include the

sip: prefix, and it must match the SIP address of a test user created in

Step 12. For example: .

 SecondTestUserSipUri is the SIP address of the second test user to be

configured for use by this test. The SIP address must include the sip: prefix,

and it must match the SIP address of a test user created in Step 12. For

example: .

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 26 27

Žádné komentáře

Dialogic 4000 Series SU4.1 Uživatelský manuál Strana 10